Properly configuring receiver parameters, including frequency, FEC, and symbol rate, ensures optimal reception and reduces common technical issues. Accurate tuning allows for seamless channel scanning and superior viewing quality.
Installation quality is equally important. Proper dish alignment, secure mounting, and quality cables strengthen signal reliability and minimize interference. When combined with precise frequency data, viewers enjoy smooth, uninterrupted access to all channels.
Accurate entry of technical parameters, including frequency, symbol rate, and FEC, ensures strong reception and prevents common signal issues. Correct tuning results in clear picture and sound quality.
Additionally, a properly installed satellite system plays a crucial role in signal strength and stability. Proper dish alignment and high-quality cabling ensure that viewers enjoy consistent and uninterrupted access to all channels.
Entering the correct parameters, including frequency, symbol rate, and FEC, ensures that channels are captured accurately. Proper tuning improves signal reliability and enhances picture and sound quality.
Installation quality, including dish alignment and cabling, significantly affects reception. Combining updated frequency data with proper installation practices guarantees a stable and high-quality viewing experience.
Properly configuring receiver parameters, including frequency, FEC, and symbol rate, ensures optimal reception and reduces common technical issues. Accurate tuning allows for seamless channel scanning and superior viewing quality.
Installation quality is equally important. Proper dish alignment, secure mounting, and quality cables strengthen signal reliability and minimize interference. When combined with precise frequency data, viewers enjoy smooth, uninterrupted access to all channels.
Accurate entry of technical parameters, including frequency, symbol rate, and FEC, ensures strong reception and prevents common signal issues. Correct tuning results in clear picture and sound quality.
Additionally, a properly installed satellite system plays a crucial role in signal strength and stability. Proper dish alignment and high-quality cabling ensure that viewers enjoy consistent and uninterrupted access to all channels.
Entering the correct frequency, symbol rate, and polarization values into the receiver reduces technical errors and strengthens signal reliability. Proper configuration is key to preventing channel loss or weak reception.
A well-aligned satellite dish and high-quality cables complement accurate tuning by maximizing signal stability. Combining updated frequency information with proper installation ensures smooth and reliable broadcasts.
Shehab TV is an Iraqi childrenâs television channel launched in 2020, dedicated to providing entertaining and educational content for kids aged 3 to 12.
Based in Iraq, it offers a safe, family-friendly environment with programs focused on Islamic values, featuring animated series, religious anthems, and educational shows.
Trusted by parents across the Arab world, Shehab TV promotes moral and intellectual growth through engaging content like Return of Juha.
As a free-to-air channel, it broadcasts via major satellites and streams live on www.shehabtv.com and YouTube.
This guide provides the latest Shehab TV frequencies on satellites as of June 2025, a step-by-step receiver tuning process, tips for strong reception, and an overview of its captivating programs.
Why Watch Shehab TV?
-
Purposeful Content: Programs instill Islamic values and positive behaviors, such as Quran memorization and kindness.
-
Diverse Programming: From religious anthems to cartoons like Return of Juha, it caters to various age groups.
-
Free and Accessible: Available free-to-air on satellites and via live streaming on www.shehabtv.com and YouTube.
-
Parental Trust: Its safe, wholesome content makes it a top choice for families in Iraq and the Arab region.
-
High Quality: Broadcasts in HD and SD to suit different receivers, ensuring a clear viewing experience.
Shehab TV Satellite Frequencies
To tune into Shehab TV, you need accurate frequency, polarization, symbol rate, and FEC (Forward Error Correction) settings for your satellite receiver.
The table below lists the latest frequencies for Shehab TV on major satellites as of June 2025, sourced from reliable platforms like www.lyngsat.com and www.channelsdir.com.
As a free-to-air channel, no decryption is required. Always verify frequencies with these sources, as transponder settings may change.
|
Satellite |
Frequency |
Polarization |
Symbol Rate |
FEC |
Coverage |
Details |
|---|---|---|---|---|---|---|
|
Nilesat 201/Eutelsat 7 West A (7.0° W) |
11392 MHz |
Vertical (V) |
27500 kS/s |
7/8 |
Middle East, North Africa |
HD, DVB-S, strong signal in Iraq, Egypt, Saudi Arabia. Named Shehab TV HD. |
|
Nilesat 201/Eutelsat 7 West A (7.0° W) |
11373 MHz |
Horizontal (H) |
27500 kS/s |
5/6 |
Middle East, North Africa |
SD, DVB-S, suitable for older receivers. Named Shehab TV. |
|
Arabsat (Badr 4/8) (26.0° E) |
11938 MHz |
Vertical (V) |
27500 kS/s |
3/4 |
Middle East, North Africa |
SD, DVB-S, reliable in UAE, Qatar, Kuwait. Named Shehab TV. |
Key Information
-
Satellite Coverage: Shehab TV primarily broadcasts on Nilesat and Arabsat (Badr). No confirmed frequencies are available on Hot Bird (13.0° E), Yahsat (52.5° E), or Arabsat 5C (20.0° E) as of June 2025.
-
Frequency Accuracy: Avoid outdated frequencies like 11177 MHz on Nilesat, which may no longer be active. The table above provides the most reliable settings.
-
Global Access: Signals may weaken outside MENA (e.g., Asia or the Americas). Stream live on www.shehabtv.com or YouTube for worldwide access.
-
Free-to-Air Status: Shehab TV is unencrypted, requiring no subscription, ensuring accessibility within satellite footprints.
Tips for Strong Reception
To enjoy Shehab TV with clear, uninterrupted viewing, follow these practical tips for satellite reception:
-
Dish Size: Use a 60-80 cm dish for Nilesat and Arabsat in MENA (e.g., Baghdad, Cairo, Riyadh). In fringe areas (e.g., northern Europe), a 90-120 cm dish enhances signal strength.
-
Precise Dish Alignment: Point your dish to Nilesat (7.0° W) or Arabsat (26.0° E) using a satellite finder or apps like DishPointer or SatFinder. Ensure no obstructions (e.g., trees) block the signal.
-
LNB Selection: Install a Universal Ku-band LNB (9.75/10.6 GHz) compatible with DVB-S for Nilesat and Arabsat. Confirm DVB-S2 support for HD broadcasts.
-
Signal Quality: Aim for 70% or higher signal quality (98% is optimal) on your receiverâs signal meter to avoid pixelation. Adjust LNB skew for peak performance.
-
Weather Protection: Ku-band signals may weaken during heavy rain. Secure your dish and check LNB caps for water damage to maintain signal stability.
-
Coverage Check: Verify your location is within the satelliteâs beam using coverage maps on www.dishpointer.com or www.satbeams.com.
Tuning Shehab TV on Your Receiver
Adding Shehab TV to your satellite receiver is quick and easy with these steps, compatible with most receivers (e.g., Strong, Humax, Starsat), though menu names may vary slightly.
-
Access the Menu:
-
Press âMenuâ or âSettingsâ on your remote.
-
Navigate to âInstallation,â âChannel Search,â or âAntenna Setup.â
-
-
Select Manual Scan:
-
Choose âManual Scan,â âManual Installation,â or âAdd Transponder.â
-
Select âAdd TPâ or âEdit Transponderâ if prompted.
-
-
Choose Your Satellite:
-
Select Nilesat (7.0° W) or Arabsat (Badr 4/8, 26.0° E) from the satellite list.
-
If not listed, manually enter the orbital position.
-
-
Enter Transponder Settings:
-
Refer to the frequency table above and input the settings for your chosen satellite (e.g., 11392 MHz, Vertical, 27500 kS/s, 7/8 for Nilesat HD).
-
Double-check entries for accuracy.
-
-
Run the Scan:
-
Press âScan,â âSearch,â or âOKâ to start the scan.
-
Select âFTA Onlyâ or âAll Channelsâ to include free-to-air channels.
-
Wait 1-3 minutes for the scan to complete.
-
-
Save Channels:
-
Press âSaveâ or âOKâ to store the scanned channels.
-
Shehab TV will appear as âShehab TVâ or âShehab TV HDâ in your channel list.
-
-
Fine-Tune for Strong Signal:
-
If the signal is weak or the channel is missing, adjust the dishâs azimuth and elevation while monitoring the signal meter.
-
Check LNB skew and cables for 70-98% signal strength.
-
-
Test the Broadcast:
-
Locate Shehab TV in your channel list and select it to confirm clear playback.
-
If issues persist, recheck settings or consult a professional installer.
-
Receiver Tips:
-
For Strong receivers (e.g., SRT 4950), enable âLNB Powerâ in the âTransponderâ menu.
-
For Humax or Starsat, set LNB to âUniversalâ for Ku-band.
-
Default PINs (e.g., 0000, 1234) may be required; refer to your manual.
Shehab TVâs Captivating Programming
Shehab TV offers a diverse lineup of programs that blend education and entertainment, with a focus on Islamic values. Key highlights include:
Top Programs
-
Friends of Shehab Messages: An interactive show featuring childrenâs letters and ideas, encouraging participation.
-
Surah Yasin Memorization Contest: A religious competition rewarding kids for Quran memorization.
-
Return of Juha: A humorous cartoon series with moral lessons, featuring Iraqi characters.
-
Educational Anthems: Islamic songs teaching letters, numbers, and values.
-
Kidsâ Lessons: Simplified lessons promoting positive behaviors and personal growth.
Content divisions
-
Educational: Programs teaching Quran, ethics, and basic skills.
-
Entertainment: Anime and cartoons like Return of Juha for all ages.
-
Religious: Anthems and contests fostering Islamic awareness.
-
Interactive: Shows encouraging kids to share ideas and engage.
Prime-time (7 PM to 11 PM) features top shows, with reruns throughout the day. Content is also available via live streaming on www.shehabtv.com and YouTube.
Entering correct parameters into the receiver, including frequency, symbol rate, and polarization, enhances signal reliability and reduces reception issues. Accurate tuning ensures better picture and sound quality.
Proper dish alignment and high-quality cabling complement accurate tuning, providing stronger signals and minimizing interference. Routine maintenance further ensures consistent performance.
By combining up-to-date frequency knowledge with effective installation, viewers can enjoy seamless satellite reception with stable and clear broadcasts.
Accurate tuning of the receiver, including frequency, symbol rate, and FEC values, is essential to capture channels effectively. Correct configuration prevents technical problems and strengthens signal reliability.
Automatic scanning features in modern receivers can simplify the tuning process, but manual adjustments with precise parameters remain the most dependable method.
Dish alignment and installation quality are just as important as tuning. A correctly aligned dish, secure mounting, and high-quality cabling contribute to stronger signals and reduce interference.
Routine maintenance ensures long-term stability and prevents sudden disruptions. Even minor improvements in setup can significantly enhance overall reception quality.
Combining accurate frequency updates with proper installation provides viewers with a smooth, consistent, and high-quality satellite viewing experience.
Entering precise receiver parameters such as frequency, symbol rate, and polarization ensures smooth scanning and reliable signal reception. Accurate tuning minimizes weak signals, errors, and interruptions.
The installation quality of the satellite system plays a major role in maintaining performance. Proper dish alignment and high-quality cabling significantly improve signal strength and reduce interference.
Combining accurate frequency updates with proper installation ensures viewers enjoy a seamless and consistent satellite viewing experience.
Correct receiver configuration, including frequency, FEC, and symbol rate, ensures stable signal reception and reduces technical issues. Proper tuning enhances both picture and audio quality.
While modern receivers include automatic scanning features, manual adjustment with precise parameters remains the most reliable method for optimal reception.
The quality of dish alignment and installation significantly affects signal stability. Well-positioned dishes and durable cabling improve performance and maintain uninterrupted access.
By combining accurate frequency data with high-quality installation, viewers can enjoy a stable and high-quality satellite viewing experience without interruptions.
Entering precise receiver parameters such as frequency, symbol rate, and polarization ensures smooth scanning and reliable signal reception. Accurate tuning minimizes weak signals, errors, and interruptions.
The installation quality of the satellite system plays a major role in maintaining performance. Proper dish alignment and high-quality cabling significantly improve signal strength and reduce interference.
Combining accurate frequency updates with proper installation ensures viewers enjoy a seamless and consistent satellite viewing experience.
Correct receiver configuration, including frequency, FEC, and symbol rate, ensures stable signal reception and reduces technical issues. Proper tuning enhances both picture and audio quality.
While modern receivers include automatic scanning features, manual adjustment with precise parameters remains the most reliable method for optimal reception.
The quality of dish alignment and installation significantly affects signal stability. Well-positioned dishes and durable cabling improve performance and maintain uninterrupted access.
By combining accurate frequency data with high-quality installation, viewers can enjoy a stable and high-quality satellite viewing experience without interruptions.
Proper receiver configuration, including frequency, polarization, and FEC values, ensures strong signal reception and minimizes technical issues. Accurate tuning improves both video and audio quality, providing a better viewing experience.
Modern receivers often include automatic scanning tools, but manual adjustment with precise parameters remains the most reliable method for optimal reception.
A well-installed satellite system, including proper dish alignment and high-quality cables, further enhances signal stability. These elements combined guarantee a reliable and high-quality viewing experience.
